Netware 4.12/4.2 - HP Tc2110 - Server - 128 MB RAM Installation And Configuration Manual

Chapter 5
18. Create the autoexec.ncf file. Add the following lines and then save the file.
load after311
load c:\server.312\nwpaload
search add 1 c:\server.312\cdsave
load cdrom
19. Load the following command from the console prompt:
load c:\server.312\312ptd\patch312
20. Install the patches from the c:\server.312\312ptd directory.
21. Edit the driver load command in the startup.ncf file to include the slot number
detected in Step
load c:\server.312\adpt160m slot=2).
22. Install any recommended vendor specific patches. See the Novell Web site for
details.
23. Down and Exit the server.
24. Run server.exe.
25. Installation of the driver for NetWare 3.12/3.2 is complete.

NetWare 4.12/4.2

Follow these instructions only if you are installing NetWare 4.12/4.2 for the first
time:
1. Begin installation of NetWare 4.12/4.2 on your server as instructed in your
NetWare documentation.
2. When a screen appears that asks you to select a disk driver, press Insert.
3. Insert the HP Ultra3 Family Manager Set disk for NetWare into your floppy disk
drive.
4. Press F3 and enter a:\netware as the path to the <File Name>adpt160m.ham
driver for NetWare.
5. Select adpt160m.ham and press Enter.
6. Select No not to save existing file, Yes to save existing file cdrom.nlm.
7. Select No not to save existing file, Yes to save existing file nbi.nlm.
8. Select No not to save existing file, Yes to save existing file nwpa.nlm.
Step 16 above (for example,
Novell NetWare Installation
43