Server Hardware; Server Software; Client Hardware - HP D5970A - NetServer - LCII Installation And User Manual

Chapter 1
ensure a successful installation. The FCArray Assistant software is delivered on
the CD-ROM accompanying the hardware.

Server Hardware

2 MB of free hard disk space
3-½ inch floppy disk drive or CD-ROM drive for installing the FCArray
Assistant Server software
Properly installed and configured FC Host Bus Adapter (FC HBA) with
the appropriate Windows NT drivers
Network interface card (NIC) connected to a functioning network

Server Software

An HP NetServer running Microsoft Windows NT 4.0 Server
Latest Microsoft Windows NT 4.0 service pack (3.0 or greater)
Appropriate network drivers for the installed network interface card
TCP/IP stack installed

Client Hardware

PC-compatible computer (includes Laptop or Notebook) with an Intel
®
80486 (or higher) class processor and at least 4 MB of system memory
®
(Pentium processor and 16 MB of system memory are recommended)
Network interface card (NIC) connected to a functioning network
3-½ inch floppy disk drive and/or a CD-ROM drive for installing the
FCArray Assistant Client software
Fixed hard disk with at least 8 MB available free space (16 MB
recommended)
Mouse or other pointing device
4
Introduction