Manual Configuration - HP D5970A - NetServer - LCII Installation And User Manual

Chapter 4
Figure 4-39. WARNING Before Applying the Configuration
3. If you're not sure, click Cancel.
WARNING
To prevent data loss, do not accept the new configuration,
unless you have backed-up all data on the disk drives. When
applying a new configuration to the disk array, all data will be
lost on the newly configured drives.
4. Type Yes and click OK if you are sure you want to apply the new
configuration and overwrite the old.
NOTE
In Assisted Configuration, the Add Logical Drive functions
similarly to the New Configuration option. In each case, RAID
Assistant leads you step-by-step through the relevant questions
for the task.

Manual Configuration

Manual Configuration provides four options:
Edit Configuration - Displays the current configuration (disk arrays and
logical drives), and allows you to make any changes required.
New Configuration - Sets up a new configuration on the controller,
deleting the previous configuration and data (if any).
Add Logical Drive - Sets up additional arrays (logical drives) leaving the
existing array(s) intact. At least one array must be configured on this
controller and un-configured drive space must remain.
Configuration
75