HP D5970A - NetServer - LCII Installation And User Manual page 117

Chapter 5
You build an analysis string, which defines a line of data on a line graph, a section
of a pie graph, or a bar on a bar graph. Each string consists of one or more
controllers, channels, and physical devices or logical drives to include in the
analysis, an operation to be analyzed, and a color and line style (for line graphs) to
represent this string graphically.
NOTE
The lower window in each Statistics View tab (Settings, Line,
Pie, and Bar) is the display window where the defined analysis
strings are listed. If the display window is blank, no active
defined analysis strings currently exist. When new strings are
created, each one appears in the display window.
Creating an Analysis String
To build an analysis string, refer to the following procedure (see Figure 5-15).
1. In Device type, select Physical devices or Logical drives to build an
analysis string.
2. In Device Selection group, under Controllers, select one or more
controllers to include in the analysis string.
Click All for all controllers.
For individual controllers, ensure All is not highlighted.
3. Under Channel, select one or more channels to include in the analysis
string.
Click All for all channels.
For individual channels, ensure All is not highlighted.
4. If you chose Physical under Device type, select one or more targets to
include in the analysis string.
Click All for all targets.
For individual targets, ensure All is not highlighted.
5. If you chose Logical under Device type, select one or more logical drives
to include in the analysis string.
Click All for all logical drives.
For individual logical drives, ensure All is not highlighted.
At the bottom of the Device Selection box, a field displays the analysis
string being constructed. The symbol * refers to All.
Monitoring
111