Show Chap - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

Show CHAP

Displays the CHAP configuration for iSCSI nodes.
Authority
Syntax
166 Command referencecommand reference
luninfo
lunmask
luns
memory
mgmt
ntp
perf [ byte | init_rbyte |
init_wbyte | tgt_rbyte |
tgt_wbyte ]
presented_targets [fc or iscsi]
properties
snmp
stats
system
targets [fc or iscsi]
vpgroups [vpgroup index]
None
show chap
Displays detailed LUN information for a specified
target and LUN. See "show LUNinfo com-
mand" on page 172.
Displays LUN mappings. See
command" on page 173.
Displays information about LUNs and their targets.
See "show LUNs command" on page 172.
Displays memory usage. See
command" on page 173.
Displays the router's management port (10/100)
configuration. See "show mgmt com-
mand" on page 174.
Displays the router's NTP configuration. See
NTP command" on page 174.
Displays information about the router's perform-
ance. See "show perf command" on page 175.
Displays the targets presented by the router: FC,
iSCSI, or both. See "show presented targets
command" on page 176.
Displays the router's properties. See
erties command" on page 177.
Displays the router's SNMP properties and trap
configurations. See "show SNMP com-
mand" on page 177.
Displays the router's FC and iSCSI statistics. See
"show stats command" on page 178.
Displays router product information, including the
serial number, software version, hardware version,
configuration, and temperature. See
command" on page 180.
Displays the targets discovered by the router: FC,
iSCSI, or both. See "show targets com-
mand" on page 181.
Displays the VPGs. See "show VPGroups com-
mand" on page 181.
"show lunmask
"show memory
"show
"show prop-
"show system