Traceroute - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

MPX200 <1>(admin) #> target rm
Index State (WWNN,WWPN/iSCSI Name)
----- ----- ----------------------
0 Offline 20:00:00:14:c3:3d:d2:bf,22:00:00:14:c3:3d:d2:bf
1 Online 20:00:00:14:c3:44:9b:86,22:00:00:14:c3:44:9b:86
2 Online 20:00:00:14:c3:44:9b:9d,22:00:00:14:c3:44:9b:9d
3 Online 20:00:00:14:c3:44:9a:fa,22:00:00:14:c3:44:9a:fa
Please select an OFFLINE Target from the list above ('q' to
quit): 0
All attribute values for that have been changed will now be
saved.

Traceroute

Displays the route that a network packet takes to reach the specified destination.
Authority
Syntax
Example:
MPX200 <1>(admin) #> traceroute
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
IP Address (IPv4 or IPv6) [0.0.0.0] 172.35.14.17
Outbound Port (0=Mgmt, 1=GE1, 2=GE2, ...) [Mgmt ] 0
Tracing route to 172.35.14.17 over a maximum of 30 hops:
1 172.17.136.2 0.4ms 0.3ms 0.5ms
2 10.7.9.5 1.1ms 1.1ms 1.1ms
3 172.21.130.233 2.7ms 2.7ms 2.6ms
4 172.21.4.245 291.4ms 291.4ms 291.4ms
5 172.21.4.246 413.6ms 417.1ms 439.2ms
6 10.35.9.1 459.1ms 465.6ms 480.0ms
7 172.35.14.17 495.3ms 483.0ms 505.9ms
Traceroute completed in 7 hops.
Admin session
traceroute
MPX200 Multifunction Router 183