migration add
Schedules a data migration job. You can enter a name for the data migration job and associate it
with a job group. Scheduling options include: immediately, at a pre-defined later time, or by serial
scheduling. Serial scheduling requires that you assign a priority to the job. The priority is used to
schedule it before (lower priority value) or after (higher priority value) a specific job in the serial
schedule queue of data migration jobs.
Session: miguser
Example:
MPX200 <1> (admin) (miguser) #> migration add
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Index
WWPN, PortId
-----
---------------------------------
0
20:78:00:c0:ff:d5:9a:05, 00-00-00
1
50:00:1f:e1:50:0a:e1:49, 82-07-00
2
50:06:01:60:4b:a0:35:de, 82-03-00
3
50:00:1f:e1:50:0a:37:18, 00-00-00
Please select a Source Target from the list above ('q' to quit): 2
Index
(VpGroup Name)
-----
--------------
1
VPGROUP_1
2
VPGROUP_2
3
VPGROUP_3
4
VPGROUP_4
Please select a VPGroup for Source Lun ('q' to quit): 4
LUN
Vendor
---
-----
0
DGC
1
DGC
2
DGC
3
DGC
4
DGC
Please select a LUN as a Source Lun ('q' to quit): 1
Index
WWPN, PortId
----- ---------------------------------
0
20:78:00:c0:ff:d5:9a:05, 00-00-00
1
50:00:1f:e1:50:0a:e1:49, 82-07-00
2
50:06:01:60:4b:a0:35:de, 82-03-00
3
50:00:1f:e1:50:0a:37:18, 00-00-00
Please select a Destination Target from the list above ('q' to quit): 3
Index
(VpGroup Name)
-----
--------------
1
VPGROUP_1
LUN Size( GB)
Attributes
-------------- ----------
5.00
5.00
5.00
5.00
5.00
Symbolic Name
--------------------
HP MSA2012fc-0
HP HSV200-1
DGC RAID-2
HP HSV210-3
Symbolic Name
--------------------
HP MSA2012fc-0
HP HSV200-1
DGC RAID-2
HP HSV210-3
MPX200 Multifunction Router
Target Type
------------
Src+Dest
Src+Dest
Src+Dest
Src+Dest
Target Type
------------
Src+Dest
Src+Dest
Src+Dest
Src+Dest
307