Setting Array Properties; Setting Array Properties In The Gui - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

4. Before beginning data migration, clear the migration logs (see
job logs" on page 281).
5. If the router fails to discover arrays, use the target rescan option (see
targets" on page 277).
6. If you are using an array-based license, follow the License Array wizard to apply the license.
7. Set the array properties: symbolic name (optional) and target type (Source or Destination) (see
"Setting array
8. Create the user-defined job groups (see
9. Configure data migration jobs (see
10. Monitor your data migration jobs (see
11. Acknowledge completed data migration jobs (see
job" on page 288).
12. After the data migration project is complete, export the migration logs to your local workstation
(see "Viewing system and data migration job
13. Make the array offline by zoning out the array ports from the MPX200, and then remove the
array.

Setting array properties

The mpx Manager provides both GUI and CLI interfaces to view and edit array properties, including
the bandwidth.

Setting array properties in the GUI

Follow these steps to set the array properties in the mpx Manager GUI:
1. In the left pane, click FC Arrays to view all the Fibre Channel storage arrays detected by the
MPX200.
2. Click the storage array that you want to use as the source array.
The Information page in the right pane displays all the properties currently set for the selected
array.
3. (Optional) In the Symbolic Name box, enter the user-friendly array name.
properties" on page 259).
"Using the Data Migration
"Viewing the status of data migration
"Viewing system and data migration
"Creating a Data migration job
Wizard" on page 263).
"Acknowledging a data migration
logs" on page 281).
MPX200 Multifunction Router
"Rescanning
group" on page 262).
jobs" on page 275).
259