Setting Audio Effects; [Audio Effects] Menu - Panasonic AG-HMX100 Operating Instructions Manual

Setting Audio Effects

The [AUDIO EFFECTS] menu is used to process sound.
Audio effects can be set for each input source.
To execute the audio effects
Press the AUDIO EFFECTS execution button.
The AUDIO FOLLOW VIDEO button can be pressed to turn
on to link the video effects and the audio effects during
execution of transition or fade.

[AUDIO EFFECTS] Menu

The menu appears when the AUDIO EFFECTS button is
pressed.
POS. X 128 Y 128
Z 512
EVENT ME TIME
1 - 8
00 02:00
AUX
E
AUDIO EFFECTS
PAN
EQ
1
EQ M LEVEL
MID
VOICE
CHANGE
MUTE
Scroll the screen to display.
Select the input source using the rotary 1 control.
[1] to [8]: Input sources 1 to 8
[AUX]: AUX input
Select the effect to set using the rotary 2 control.
[PAN]
[PAN] is set to change the audio balance between left and
right.
Rotary 2 Rotary 3
PAN
OFF
OFF
ON
Select [ON] or [OFF] to specify whether or not to apply the
effect using the rotary 3 control.
The factory default setting is [OFF].
PATTERN INT
0056 WHT
F
IN CH BALANCE
OFF L 0
L LEVEL H LEVEL
ON 0 0
FREQ Q
0 1.01kHZ 0.5
PITCH LEVEL
OFF UP 5
OFF AB
Rotary 4 Rotary 5
IN CH BALANCE
L 0
L L7
R L6
L+R
L1
0
R1
R2
R7
Set [IN.CH] to [L], [R], or [L+R] using the rotary 4 control.
[IN.CH] is used to select the channel to be emphasized.
L: Left channel
R: Right channel
L+R: Both left and right channels
The factory default setting is [L].
Set [BALANCE] in the range of L7 to 0 and 0 to R7 using
the rotary 5 control.
[BALANCE] is used to select whether to expose the
channel selected with [IN.CH] toward the right direction
(R) or left direction (L) and to set the gap from the center
position using a numeric value.
The factory default setting is 0 (center).
[EQ]
[EQ MID] is used to adjust the high-range or mid-range
audio level and set equalizer effects.
Rotary 2 Rotary 3
EQ
ON
OFF
ON
Select [ON] or [OFF] to specify whether or not to apply all
equalizer effects using the rotary 3 control.
The factory default setting is [ON].
Set the [L LEVEL] (low-range level in dB) in the range of
[–14dB] to [14dB] in 2 dB steps using the rotary 4 control.
The factory default setting is [0].
Set the [H LEVEL] (high-range level in dB) in the range of
[–14dB] to [14dB] in 2 dB steps using the rotary 5 control.
The factory default setting is [0].
[EQ MID]
Rotary 2 Rotary 3
EQ M LEVEL
MID 0
–14dB - 14dB
Set the [M LEVEL] (mid-range level in dB) in the range of
[–14dB] to [14dB] in 2 dB steps using the rotary 3 control.
The factory default setting is [0].
Set the [FREQ] (Frequency to be emphasized) in the range
of [100Hz] to [10.2kHz] using the rotary 4 control.
The factory default setting is [1.01kHz].
Rotary 4 Rotary 5
L LEVEL H LEVEL
0 0
–14dB - 14dB –14dB - 14dB
Rotary 4 Rotary 5
FREQ Q
1.01kHz 0.5
100Hz-10.2kHz 0.5
1
2
5
17