System Configured With 2 Units Of Ag-Hmx100P/Hmx100E And 4 Cameras - Panasonic AG-HMX100 Operating Instructions Manual

System Configured with 2 Units of AG-HMX100P/HMX100E and 4 Cameras

Two units of AG-HMX100P/HMX100E are used and the
video from up to four cameras is switched to be used as
the input source.
SDI inputs 1 to 4 of the first mixer are used as the
L-channel input sources, while those of the second mixer
are used as the R-channel input sources.
Program outputs from the first and second mixers are
paired to be used as the L-channel and R-channel outputs,
respectively.
L
R
Professional-use
3D-integrated camera
L
R
Professional-use
3D-integrated camera
L
R
Professional-use
3D-integrated camera
SDI (video and
audio) input
L-channel
side
Professional-use camera
R-channel
side
Professional-use camera
24
3D mode is set to [MODE3-M] on the master unit and
[MODE3-S] on the slave unit ( page 25).
 NOTE
• When 3D mode is set to [MODE3-S] on the slave unit, all
audio outputs are muted. Make audio output from the master
unit.
• In order to synchronize two units of AG-HMX100P/HMX100E,
be sure to connect a signal generator and input the same
synch signal.
AG-HMX100P/HMX100E
(Set as master unit)
SDI IN 1
SDI IN 2
SDI IN 3
SDI IN 4
RS-232C
G/L external
sync signal
RS-232C G/L
SDI IN 1
SDI IN 2
SDI IN 3
SDI IN 4
AG-HMX100P/HMX100E
(Set as slave unit)
SDI output
Program
output
SDI OUT PGM
DVI-D OUT
PGM
G/L
DVI-D output
G/L external
sync signal
Signal generator
Program output
SDI output
SDI OUT
PGM
DVI-D OUT
PGM
DVI-D output
Program output
L
R
Professional-use
3D monitor
L
Professional-use
projector
R
Professional-use
projector