Panasonic AG-HMX100 Operating Instructions Manual page 18

Set [Q] (Quality factor value: resonance level) to [0.5], [1],
[2] or [5] using the rotary 5 control. As the value is larger,
resonance lasts longer.
The factory default setting is [0.5].
[VOICE]
Settings can be made for the voice changer.
Rotary 2 Rotary 3
VOICE
CHANGE OFF
OFF
ON
Select [ON] or [OFF] to specify whether or not to apply the
effect using the rotary 3 control.
The factory default setting is [OFF].
Select [UP] or [DOWN] for [PITCH] to specify whether to
increase or decrease the sound pitch using the rotary 4
control.
The factory default setting is [UP].
Set [LEVEL] in the range of 0 to 10 using the rotary 5
control.
The factory default setting is 5.
[MUTE]
Rotary 1 Rotary 2 Rotary 3
MUTE
OFF
-12dB
-20dB
-60dB
Select the mute level from [–12dB], [–20dB], and [–60dB]
using the rotary 3 control.
Select [OFF] to apply no effect.
The factory default setting is [OFF].
Select the channel to mute from [AB] (buses A and B),
[ABAUX] (buses A and B and AUX output), and [ALL] (all
channels) using the rotary 4 control.
The factory default setting is [ALL].
18
Rotary 4 Rotary 5
PITCH LEVEL
UP 5
DOWN 0-10
UP
Rotary 4 Rotary 5
OFF AB
AB
ABAUX
ALL