About Your Projector; Remote Control - Panasonic PT-DW530E Operating Instructions Manual

About Your Projector

Remote control

Top view
J
Remote control
signal emitters
Front view
J
Attention
Do not drop the remote control.
z
Avoid contact with liquids or moisture.
z
Do not attempt to modify or disassemble the remote control.
z
Do not let strong light shine onto the signal receptor. The remote control may malfunction under strong light such as
z
fluorescent.
Note
The remote control can be used within a distance of about 15 m if pointed directly at the remote control receiver. The
z
remote control can control at angles of up to ± 15 °C vertically and ± 30 °C horizontally, but the effective control range may
be reduced.
If there are any obstacles between the remote control and the remote control signal receptor, the remote control may not
z
operate correctly.
The signal will be reflected off the screen. The operating range may differ due to the screen material.
When the projector receives a signal from the remote control, the Power indicator will flash.
z
Press the tab and lift up the
cover.
Remote control indicator
Flashes by pressing any buttons
Switch between stand-by mode and projection mode.
These buttons select the RGB1, RGB2, DVI-D, VIDEO, S-VIDEO and HDMI terminals.
( Æ page 37)
Displays and clears the main menu, and returns to the previous menu when the menu
is displayed.( Æ page 40)
Temporarily freezes video and audio. (
Restores the default factory setting. (
Assign the frequently use functions from options for shortcut. (
Specifies the ID of the remote control. (
Makes the remote control available to control any ID projectors. (
Pressing this button while projecting an image automatically corrects the picture
positioning on the screen. While the auto setup feature is active, a message
"PROGRESS" appears on the screen. (
Navigate through the menu items with ▲▼◄►, and activate them with the <ENTER>
button. ( Æ page 40)
Turn off the projection temporarily. (
Opens [ECO MANAGEMENT] menu. (
Control to adjust the volume of the speaker. (
Installing/removing batteries
Insert the batteries according to
the polarity diagram indicated
inside. (insert the
Remove the batteries in the
reverse order to setting.
Æ
page 37)
Æ page 40)
Æ page 38)
Æ
page 22)
Æ
Æ page 38)
Æ page 37)
Æ
page 38)
Æ page 39)
side first).
page 22)
You can attach
a favourite
strap onto the
remote control.
19
ENGLISH -