Initialize; Service Password - Panasonic PT-DW530E Operating Instructions Manual

PROJECTOR SETUP menu

INITIALIZE

This returns various setting values to their factory
default settings.
1 ) Press ▲▼ to select [INITIALIZE].
2 ) Press <ENTER> button.
The [SECURITY PASSWORD] screen will be
z
displayed.
3 ) Enter the password set for the
[SECURITY PASSWORD].
The [INITIALIZE] screen will be displayed.
z
4 ) Press ▲▼ to select the desired
initialize item.
All setting values including [ENTRY
SIGNAL], [NETWORK/E-MAIL], and
ALL USER [LOGO IMAGE] are returned to their
DATA factory default values.
The projector enters a standby state
in order to reflect the setting values.
All setting values saved for each of
the input signals are cleared.
ENTRY To clear just some registered
SIGNAL signals, perform the procedure
described in "Deleting a registered
data" (
All setting values in [NETWORK
NETWORK/
SETUP] and [E-mail setup] settings
E-MAIL
will return to factory settings.
The registered image data for
LOGO IMAGE [LOGO1] will return to factory
settings.
5 ) Press <ENTER> button.
The confirmation screen will be displayed.
z
6 ) Press ◄► to select [OK], and press
<ENTER> button.

SERVICE PASSWORD

This function is used by a service person.
70
- ENGLISH
Æ page 72).