JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual page 119

4
Setting the Display Language According to the
Country of Use
A
Click the [K] button at the top right corner of the
screen.
B
Select [Language] from the menu that appears.
C
Select the language for the country of use from the
displayed sub-menu.
D
Click [OK] when the dialog appears.
E
Click the [ ] button at the top right corner to exit the
NVR Viewer.
hThe selected language will be enabled during the
next startup.
Uses of the NVR Viewer
For uses of the NVR Viewer, refer to the following pages.
[Viewing Live Images via Mouse Control] (A Page 28)
[Playing Back Recorded Images via Mouse Control] (A
Page 34)
[Screen Setup] (A Page 54)
[ ] Button
[K] Button
Exiting/Logging Out of the NVR Viewer
[Log Out] Button
Logging Out
1
Click the [Log Out] button
● You are logged out and the Login screen of the NVR
Viewer appears again.
Note :
● If you have rebooted the VR-N1600U/E or NVR Viewer
unit, log out from the NVR Viewer on the surveillance PC
once, and login again.
Exiting
1
Click the [ ] button
● Ends the NVR Viewer.
[ ] Button