Deleting Temporary Files (Operation On The Vr-N1600U/E Unit); Deleting Data From A Cd-Rw (Operation On The Vr-N1600U/E Unit) - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

14
Insert the media (CD-R or CD-RW) that you
want to write data to into the CD drive.
● The space available in the media is shown in [Free
Media Space].
● The [Burn] button is enabled (operable).
15
Select the check boxes for the AVI/JPG/DB
files that you want to write to the CD from the
data list.
● The total volume of the selected data will appear in
[Total Selected Vol].
● To select all the files, click the [Select All] button.
● To deselect all the files, click the [Unsel.All] button.
16
Press the [Burn] button
● A [YES] or [NO] message asking you whether to start
writing appears. Select YES .
Memo :
● If no file has been selected from the data list, an error will
occur.
● If the total volume of the selected data exceeds the
available memory space in the media, an error will occur.
17
When writing is complete, the following
message appears.
● To delete the temporary files, select YES .
● To write the same data to another CD, select NO .
Deleting Temporary Files (Operation on the VR-
N1600U/E Unit)
1
Select the temporary files you want to delete
from the data list.
2
Click the [Erase Sel Data] button
A [YES] or [NO] message asking you whether to delete the
selected data appears. Select YES .
Deleting Data from a CD-RW (Operation on the VR-
N1600U/E Unit)
1
Insert the CD-RW
● The [Erase CD-RW] button is enabled .
2
Click the [Erase CD-RW] button
● A [YES] or [NO] message asking you whether to delete
data in the CD-RW appears. Select YES .
Note :
● You cannot perform other operations while data is being
written to the CD.
● Recorded images may be omitted during writing to the CD
(temporary recording error).
● Do not display the Burn CD screen during export.
● Do not connect the CD drive while the media is inserted.
● Do not disconnect the CD drive while the Burn CD screen
is displayed.
● If the media is not detected, restart the Burn CD screen.