Recording Before/After Occurrence Of Event Or Motion; Ptz Camera Control - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

Instruction manual
Hide thumbs Also See for VR-N1600U - 16 Channel Network Video Recorder:
Table of Contents

Advertisement

Others
Recording Before/After
Occurrence of Event or
Motion
You can record images before and after the occurrence of an
event or motion when recording in the recording control
mode (A Page 47).
Stopped
Records for set time before
Set time
1
Go to [Settings] (A Page 50), and select
Conditionally in [Recording Settings]-[When
to store images in database]
2
Select On motion or On event
3
Specify the number of seconds in [( )seconds
pre/post recordings on motion/event]
● Images are recorded during the specified time interval
before and after an alarm or motion is detected.
1
Memo :
● Sequences refers to sequences of images that are
recorded when an event or motion is detected.
● For details on using sequences, refer to [Searching
Recorded Image Using Sequence] (A Page 37).
Motion or event
Stopped
Records for set time after
Set time
2
3

PTZ Camera Control

Connecting the PTZ camera to the COM port of the network
encoder (VN-E4) enables the PTZ control on the live screen
of the NVR Viewer. For details on PTZ camera settings, refer
to [PTZ Camera Settings (COM1/COM2)] (A Page 76).
For cameras that have specified the [JCBP-S] protocol in P/
T/Z type controlled through COM1/COM2 of [PTZ Camera
Settings (COM1/COM2)], control of the iris, focus and
camera menu are also enabled on the live screen of the NVR
Viewer in addition to PTZ control.
Memo :
● A PTZ camera is an analog camera with an analog output
that enables PTZ control via RS-485.
WARNING
LIVE/BROWSE
OPERATE
ALARM
HDD
SELECT
LOCK
REC CONTROL
PTZ/PRESET
FUNCTION
SERIAL
CANCEL
ZOOM OUT
ZOOM IN
ENTER
[5] Button
[FUNCTION] Button
1
Press and hold the [FUNCTION] button, and
press the [5] keypad button at the same time
● The [Camera Control] screen appears.
2
Select the camera you want to control from the
camera selection list, and click the [Set
ENTER)] button
● Camera control is enabled.
● The functions of the buttons are described below.
[NVR]
REV
SEARCH
KEY
ALARM CLEAR
REC/STOP
STOP(PB)
PLAY
2
FWD
SKIP

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vr-n1600e

Table of Contents