During Initial Startup - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

Instruction manual
Hide thumbs Also See for VR-N1600U - 16 Channel Network Video Recorder:
Table of Contents

Advertisement

Getting Started

During Initial Startup

Perform language setting and automatic camera registration
when starting up VR-N1600U/E for the first time.
Before Starting Up.
● The DHCP setting is required for the IP camera
beforehand. Start up the VR-N1600U/E first, then switch
the camera on after confirming that the [Auto Detect
Setting] window is displayed.
● Refer to the user manual supplied with the camera for
instructions on how to specify the IP camera settings.
● By default, [Time Zone] is set to [(GMT-05:00) Eastern
Time](VR-N1600U)/[(GMT) Greenwich Mean Time](VR-
N1600E) and [Auto Summertime Adjustment] is
checked. Specify a Time zone according to the region
used. Refer to the INSTRUCTIONS on how to specify a
Time zone settings.
Keypad
WARNING
LIVE/BROWSE
OPERATE
ALARM
HDD
SELECT
LOCK
REC CONTROL
PTZ/PRESET
FUNCTION
SERIAL
CANCEL
ZOOM OUT
ZOOM IN
ENTER
[16/ENTER]
Button
Start up VR-N1600U/E
1
Turn on the power switch at the rear panel.
● VR-N1600U/E starts up.
REV
SEARCH
KEY
ALARM CLEAR
REC/STOP
STOP(PB)
PLAY
[SKIP]
[KEY] Button
Button
Selecting a language
The [Language Setting] screen appears when you start up
VR-N1600U/E for the first time. Select the language to use
using the steps below.
1
Select a language
● Use the [2/D] or [10/0/E] button to select a language.
2
Use the [SKIP] button to select [OK], followed by
pressing the [16/ENTER] button
● The The system is being set up. message may
appear depending on the setting, and the system is
automatically rebooted.
Memo :
● Selecting [OK] changes the color of the [OK] characters
from brown to orange.
FWD
Automatic Registration of Cameras
SKIP
After you have started up VR-N1600U/E for the first time and
finished selecting a language, the [Auto Detect] screen
appears.
1
Check to ensure that [Auto Detect] is selected,
followed by pressing the [16/ENTER] button
● The Please wait... message appears.
Memo :
● The characters of the selected item switches to orange
color.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vr-n1600e

Table of Contents