Adding A Carousel - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

Basic Operation
Screen Setup (continued)

Adding a Carousel

You can use the carousel feature to display images from
multiple cameras in sequence in a single view position. Also,
you can set the time interval for switching the camera to view.
1
Displaying the [Screen Setup] Screen
2
Click and drag the [Carousel] icon in the
[System Overview] section to the position that
you want to set in the view
[NVR] Camera3
[Carousel]
[NVR] Camera4
3
Release the mouse button at the position
[NVR] Camera3
4
Select the preset carousel position and specify
its properties in the [Properties] section
● Begin by selecting the cameras to include in the
carousel. You can also select all cameras on a server
at once by selecting the check box next to the [Server]
icon.
A
B
C
[NVR] Camera3
Item
A
mage Enables you to adjust the image
resolution and picture quality during
Quality
viewing. Select Full at all times.
B
Frame This is the viewing frame rate.
Rate
Select [Unlimited] (default value; same as
live settings), [Medium] (25 % of the frame
rate), or [Low] (5 % of the frame rate),
depending on the frame rate specified in
[Live Settings] (A Page 50) on the
[Camera Settings] screen.
C
Maintain If this check box is selected, images will
not be stretched to fit the size of the
Image
display position. Images will be displayed
Aspect
in the aspect ratio that they have been
Ration
recorded.
[NVR] Camera2
[NVR] Camera4
[NVR]Camera1
[NVR] Camera2
[NVR] Camera4
Description