Auto Detect Setting - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

Applications
Main Menu List (continued)

Auto Detect Setting

This section enables you to assign an IP address to each camera and configure various auto detect settings.
For procedures on using the Auto Detect feature, refer to [Auto Detect Settings] (A Page 100).
A
B
C
D
Item
A
IP Lease
Preset Values
Enable For configuring the function to assign IP addresses to each
network camera.
Disable
Memo :
● In order to assign an IP address of the network camera
using the IP Lease feature, you need to enable the DHCP of
the network camera. For procedures to enable the DHCP of
the network camera, refer to the [INSTRUCRTIONS] of the
network camera.
● If a network uses a multiple number of VR-N1600U/E units,
enable the [IP Lease] only for one unit. Select Disable if a
DHCP server is operating on the same network. When the
[IP Lease] is enabled for two or more devices at the same
time, the IP address may change to a static address, and
cause malfunction of the cameras.
Description
E
F
G
Reference
Page
A Page 100