Placement Direction; Screw Holes - Asus M2N-VM DH Manual

1.5.2

Placement direction

When installing the motherboard, make sure that you place it into the
chassis in the correct orientation. The edge with external ports goes to the
rear part of the chassis as indicated in the image below.
1.5.3

Screw holes

Place eight (8) screws into the holes indicated by circles to secure the
motherboard to the chassis.
Do not overtighten the screws! Doing so can damage the motherboard.
Place this side towards
the rear of the chassis
1-10
M2N-VM DH
R
Chapter 1: Product introduction