Asus M2N-VM DH Manual page 35

3. Keyboard power (3-pin KBPWR)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer
when you press a key on the keyboard (the default is the Space Bar).
This feature requires an ATX power supply that can supply at least
500 mA on the +5VSB lead, and a corresponding setting in the BIOS.
M2N-VM DH
M2N-VM DH Keyboard Power Setting
4. PCIE controller setting (3-pin PCIE_SW)
This jumper allows you to enable the onboard DVI device or PCIE x
1 or x4 device on your PCIEx16 slot. Set this jumper to pins 1-2 to
enable the onboard DVI, or to pins 2-3 to enable the PCIE x 1 and x 4
device on your PCIEx16 slot.
M2N-VM DH
M2N-VM DH PCIE_SW Setting
ASUS M2N-VM DH
R
R
KBPWR
1 2 2 3
+5V
+5VSB
(Default)
PCIE_SW
(Default)
1-25