Asus M2N-VM DH Manual page 45

11. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module
that supports either High Definition Audio or AC`97 audio standard.
Connect one end of the front panel audio I/O module cable to this
connector.
M2N-VM DH
M2N-VM DH Azalia Analog Front Panel Connector
• We recommend that you connect a high-definition front panel audio
module to this connector to avail of the motherboard high-definition
audio capability.
• By default, this connector is set to AC97 Audio. If you want to
connect a High Definition front panel audio module to this connector,
set the Front Panel Support Type item in the BIOS to [HD Audio].
See section "2.4.5 Onboard Device Configuration" for details..
12. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface
(S/PDIF) port(s). Connect the S/PDIF In/Out module cable to this
connector, then install the module to a slot opening at the back of the
system chassis.
M2N-VM DH
M2N-VM DH Digital Audio Connector
The S/PDIF module is purchased separately.
ASUS M2N-VM DH
AAFP
R
R
Azalia-compliant
pin definition
GND
SPDIFOUT
+5V
SPDIF_OUT
Legacy AC 97-compliant
pin definition
1-35