Toshiba e-STUDIO400P Printing Manual page 155

3.PRINTING FROM Macintosh
Color Settings 4 6
In the Color Settings 4 6, you can set image attributes for printing.
1
1) Background Adjustment
Adjusts the density level of the background. You can set from -4 (lightest) to 4 (darkest).
Finishing
In the Finishing menu, you can set the destination, hole punching and stapling.
1
2
3
4
1) Destination
This selects the destination tray.
- Printer's Default — Select this to route the output to the default tray (that is set as the default tray for raw jobs in
the Printer setting page of the TopAccess Administrator's page).
- Exit Tray — Select this to set the output to the exit tray of this equipment.
- Upper Exit Tray — Select this to set the output to the upper exit tray of this equipment.
- Side Exit Tray — Select this to set the output to the side exit tray of this equipment.
- Tray 1 — Select this to set the output to the upper tray of the Finisher (optional).
- Tray 2 — Select this to set the output to the lower tray of the Finisher (optional).
Destinations selectable differ depending on the model and the option configuration.
Depending on the type of Finisher (optional) installed and destination settings, stapling and hole punching may
not be performed.
Depending on the equipment settings, the paper may be delivered to a tray that cannot carry out stapling or
hole punching when [Printer's Default] is selected as the [Destination] option.
[Tray 1] and [Tray 2] can be enabled when the Finisher (optional) or Saddle Stitch Finisher (optional) is
installed.
[Side Exit Tray] can be enabled only when neither of the Finisher (optional) and the Saddle Stitch Finisher
(optional) is installed.
Printing From Application on Mac OS X 10.2.4 to Mac OS X 10.6.x
3 PRINTING FROM Macintosh
153