Toner Save; Booklet Modes - Toshiba e-STUDIO400P Printing Manual

4.PRINTING FROM UNIX/Linux

Toner Save

The toner save mode can be set using the following option.
Option Value Alternate Value
tonersave=on ON
tonersave=off OFF
Example: The command to set the toner save mode is "lp -o tonersave=on <filename>".

Booklet Modes

The booklet mode can be selected using the following options.
The booklet mode applies only for the PostScript data. Performing the booklet printing using the PCL data is invalid.
Option Value Alternate Value
booklet=letter lt
LT
booklet=A4 a4
booklet=legal lg
LG
booklet= st
statement ST
booklet=ledger ld
LD
booklet=folio folio-japan
booklet=A3 a3
booklet=A5 a5
booklet=B4 b4
B4-JIS
b4-jis
booklet=B5 b5
B5-JIS
b5-jis
booklet= co
computer CO
booklet=legal13 lg13
LG13
booklet=SQ85 sq85
letter-square
booklet=8K 8k
booklet=16K 16k
In a job, if this value is LT, and in PDL too the data are for LT paper size, this will result in a scaled booklet on Letter paper.
In a job, if this value is A3, and in PDL the data are for A4 paper size, this will result in a tiled booklet on A3 paper.
When the Booklet Mode options is selected, the paper size is automatically set to the same size as for Booklet Mode. This
function is only available for A3, A4, B4, Letter and Ledger paper sizes.
If the booklet mode is selected, then duplexing is also selected automatically (sduplex). Setting duplexing separately can
override the booklet mode setting for duplexing.
Example: The command to select Letter size paper for the booklet printing mode is "lp –o booklet=letter <filename>".
Description
Set the toner save mode.
Cancel the toner save mode.
Description
Select Letter size paper for the booklet printing mode.
Select A4 size paper for the booklet printing mode.
Select Legal size paper for the booklet printing mode.
Select Statement size paper for the booklet printing
mode.
Select Ledger size paper for the booklet printing mode.
Select Folio size paper for the booklet printing mode.
Select A3 size paper for the booklet printing mode.
Select A5 size paper for the booklet printing mode.
Select JIS B4 size paper for the booklet printing mode.
Select JIS B5 size paper for the booklet printing mode.
Select Computer size paper for the booklet printing
mode.
Select Legal-13 size paper for the booklet printing
mode.
Select 8.5 inch square size paper for the booklet
printing mode.
Select 8K size paper for the booklet printing mode.
Select 16K size paper for the booklet printing mode.
4 PRINTING FROM UNIX/Linux
Printing From Application 169