Toshiba e-STUDIO400P Printing Manual page 48

2 PRINTING FROM WINDOWS
2) Print Style
This selects how you want to print on insertion sheets.
- Blank — Select this to insert blank sheets.
- 1 Side — Select this to print the specified page on the front side of the insertion sheets.
- 2 Sides — Select this to print the specified page and the next page on both sides of the insertion sheets.
3) Paper Source
Select the location from where the insertion sheets are to be fed. When [Auto] is selected, the paper is automatically
selected according to the printed document size.
The selectable values in the [Paper Source] box vary depending on the optional devices installed on this
equipment and their configuration on the [Device Settings] tab.
4) Paper Type
Select the paper type to be inserted.
5) Use Tab Paper
Select this check box when you insert a sheet of tab paper between two specified pages or print the data of the
specified page in the originals on the inserted tab paper.
6) Tab Manufacturer
Select the product name of the tab paper that you use. This equipment supports the following tab paper.
For Letter Tab:
For A4 Tab:
If you use tab paper other than those above, select [Custom]. When you select [Custom], you must specify the tab
extension manually.
7) Number of tabs per Bank
Enter the number of tabs for each tab set. This must be set only when [Custom] is selected in the [Tab Manufacturer]
option.
8) Tab Extension
Enter the width of the tab extension. This must be set only when [Custom] is selected in the [Tab Manufacturer] option.
9) Image Shift Width
Enter the width to shift the printed image.
For example, if you want to print text on the tab extension of Letter Tab paper, create a Letter sized document and
input the text on the right side. Specify the distance the printed image is shifted in printing on tab paper.
When creating a document for tab printing, you must place the text at the exact height to fit the tab extension.
The selectable range of the edge margin differs depending on the model. See the following for setting this
option:
- For the e-STUDIO6550C Series and the e-STUDIO4540C Series
The margin between the shifted text and right edge of the tab extension must have at least 0.17 inches (4.2
mm) of space because any data in this space are not printed. Enter the same value in the [Tab Extension]
box and the [Image Shift Width] box.
Document
fit the tab extension
For models other than the above, refer to the corresponding Printing Guide.
46 Setting Up Print Options
Blanks USA copy Tabs (5 Banks) LT + 1/2" Tab
Blanks USA copy Tabs (8 Banks) LT + 1/2" Tab
KOKUYO A4-S (5 Banks)
King JIM A4-S (5 Banks)
At least 0.17" or 4.2 mm
Printed Image
Must exactly
Width of Tab Extension = Image Shift Margin