Toshiba e-STUDIO400P Printing Manual page 40

2 PRINTING FROM WINDOWS
- Center Double — Select this to fold and double-staple the printed document in the center. When you select this,
the pages will be printed on the sheets according to the print option settings, and then simply fold and double-
staple in the center of the sheets.
[Center Double] can be used to create a saddle-stitching for a document that has already been made as a
paginated booklet. To create a paginated booklet from a normal document, perform the booklet printing in the 2-
Sided Printing option. When [Center Double] is used, select the [Staple Down the Center] check box in the [Booklet
Details] dialog box.
The selectable options vary depending on the paper size.
The "Staple" option is available only when the Finisher (optional) is installed.
[Center Double] can be selected only when the Saddle Stitch Finisher (optional) is installed.
The "Staple" option is not available when the Group Copies / Magazine sort function is selected.
Stapling cannot be set when the following paper sizes are selected in the [Print Paper Size] box in the [Basic]
tab.
- A5
- A6
- 305 x 457 mm
- Statement
- 12 x 18"
- A4 Tab
- Letter Tab
- 320 x 450 mm
- 320 x 460 mm
- 13 x 19"
- Custom Paper Size
Stapling cannot be set when the following paper types are selected at the [Paper Type] box in the [Basic] tab.
- Thick 4
- Special 1
- Special 2
- Transparency
- Thick 4 (Back)
- Special 1 (Back)
- Special 2 (Back)
For detailed instructions on how to print with the [Staple] setting, see the following page:
P.96 "Stapling"
38 Setting Up Print Options