Toshiba e-STUDIO400P Printing Manual page 34

2 PRINTING FROM WINDOWS
5) Paper Type
This sets the media type of the paper.
- Plain (Auto) — Select this when printing on plain paper.
- Plain — Select this when printing on plain paper.
- Recycled — Select this when printing on recycled paper.
- Thick1 — Select this when printing on thick 1 paper.
- Thick2 — Select this when printing on thick 2 paper.
- Thick3 — Select this when printing on thick 3 paper.
- Thick4 — Select this when printing on thick 4 paper.
- Special 1 — Select this when printing on special 1 paper.
- Special 2 — Select this when printing on special 2 paper.
- Transparency — Select this when printing on transparent sheets.
- Plain1 — Select this when printing on plain 1 paper.
- Plain2 — Select this when printing on plain 2 paper.
- Thick1 (Back) — Select this when printing on the back side of thick 1 paper.
- Thick2 (Back) — Select this when printing on the back side of thick 2 paper.
- Thick3 (Back) — Select this when printing on the back side of thick 3 paper.
- Thick4 (Back) — Select this when printing on the back side of thick 4 paper.
- Special 1 (Back) — Select this when printing on the back side of special 1 paper.
- Special 2 (Back) — Select this when printing on the back side of special 2 paper.
- Thin — Select this when printing on the back side of thin paper.
The applicable paper weight for each paper type differs depending on the model. For details of the paper
weight, refer to the corresponding Quick Start Guide.
When [A4 Tab] or [Letter Tab] is selected at the [Print Paper Size] box, [Tab] will be displayed and you cannot
change the paper type.
Setup items differ depending on the model.
For more information about the paper types that are available for this equipment, refer to the Quick Start Guide.
6) Destination
This selects the tray to which the print job is made to exit. The figure on the right indicates the destination currently set
with an arrow.
- Exit Tray — Select this to have paper exit to the exit tray.
- Upper Exit Tray — Select this to have paper exit to the upper exit tray.
- Job Separator Upper — Select this to route the upper exit tray of the Job Separator (optional).
- Job Separator Lower — Select this to route the lower exit tray of the Job Separator (optional).
- Side Exit Tray — Select this to route the output to the side exit tray of this equipment.
- Tray 1 — Select this to route the output to the upper tray of the Finisher (optional).
- Tray 2 — Select this to route the output to the lower tray of the Finisher (optional).
- Saddle Tray — Select this to route the output to the saddle tray of the Saddle Stitch Finisher (optional).
The selectable items differ depending on the model and the option configuration.
The destination is limited to [Saddle Tray] when you perform folding print or saddle stitch print with the Saddle
Stitch Finisher (optional) installed.
You can select the tray by directly clicking on the figure on the right.
Select [Tray 1] if you want to reduce the initialization period if the Finisher (optional) is installed.
7) Number of Copies
This sets the number of printed copies. This can be set at between 1 and 9999.
The selectable range of the number of copies differs depending on the model.
- For the e-STUDIO6550C Series
1 copy to 9999 copies
- Other models
1 copy to 999 copies
32 Setting Up Print Options