D-Link DWC-1000 User Manual page 111

Table 6-2. Fields on the IPSEC MODE CONFIG Page
Field
Tunnel Mode
Start IP Address
End IP Address
Primary DNS
Secondary DNS
Primary WINServer
Secondary WINServer
In a split DNS infrastructure, you create two zones for the same domain, one to be used by the internal network and the other used by
the external network. Split DNS directs internal hosts to an internal domain name server for name resolution and external hosts are
directed to an external domain name server for name resolution.
VPN Settings
Select a tunnel mode. Choices are:
Full Tunnel = every packet destined to the Internet or remote server goes through the tunnel.
•
Split Tunnel = traffic destined to the Internet does not pass through the tunnel.
•
Enter the first address to be allocated in this pool.
Enter the last address to be allocated in this pool.
Primary DNS server is used by clients connected to this router to resolve domain names. If
Tunnel Mode = Split Tunnel, the DNS server should be internal domain name server.
Secondary DNS Server is used by clients connected to this router to resolve domain names. If
Tunnel Mode = Split Tunnel, the DNS server should be internal domain name server.
Enter the primary Windows NetBIOS Name Server used by clients to resolve NetBIOS names.
Enter the secondary Windows NetBIOS Name Server used by clients to resolve NetBIOS names.
Split DNS Names
111
DWC-1000 Wireless Controller User's Guide
Description