3. Edit the settings as desired (see 64).
4. Click Save Settings.
Table 4-2. Fields on the MULTI VLAN SUBNET CONFIG Page
Field
VLAN ID
IP Address
Subnet Mask
DHCP Mode
Domain Name
Advanced Configuration Settings
MULTI VLAN SUBNET
Read-only field that shows the ID you assigned to the VLAN when you created it.
Enter the IP address for the VLAN.
Enter the subnet mask for the VLAN.
DHCP
Select a DHCP mode for the VLAN. Choices are:
None = select this setting if the computers on the LAN are configured with static IP addresses
•
or are configured to use another DHCP server. The remaining fields become unavailable.
DHCP Server = select this setting to use the wireless controller as a DHCP server. Complete
•
the remaining settings on the page.
DHCP Relay = if you select this setting, you need only enter the relay gateway information.
•
Enter the domain name for the VLAN.
64
DWC-1000 Wireless Controller User's Guide
Description