D-Link DWC-1000 User Manual page 207

3. If the firmware version on the D-Link support website has a higher number than the
firmware version shown under Firmware Information, continue with this procedure.
4. Download the new firmware from the D-Link website.
5. Under Firmware Upgrade, click the Browse button.
6. In the Choose File dialog box, navigate to the firmware file, and then click the file and click
Open.
7. Click Upgrade.
8. At the confirmation message, click OK to start the firmware upgrade. A progress bar shows
the progress of the upgrade.
Note: The upgrade process takes a few minutes. Do not interrupt the upgrade or turn off the
system; otherwise, you can damage the firmware. Wait for the upgrade to complete before
browsing any sites from your browser.
9. When the upgrade completes, log in to the wireless controller web management interface,
click TOOLS > Firmware, and confirm that the new firmware appears next to Firmware on
the FIRMWARE page.
10. Record the firmware level in Appendix A.
Maintenance
207
DWC-1000 Wireless Controller User's Guide