D-Link DWC-1000 User Manual page 225

Option
Unit
Day
Time
To enable a Syslog server, check the box next to an empty Syslog server field and enter an IP address or FQDN in the Name field. The
selected facility and severity level messages are sent to the configured (and enabled) Syslog server after you save the settings on this
page.
Check box
Name
Syslog Facility
Syslog Severity
Troubleshooting
Select the period of time that you need to send the log. This option is useful when you do not
want to receive logs by e-mail, but want to keep e-mail options configured, so you can use the
Send Log function Event Log viewer pages. Choices are:
Never = disable sending of logs.
•
Hourly = send logs every hour.
•
Daily = send logs every day at the Time specified.
•
Weekly = send logs weekly, at the Day and Time specified.
•
If Unit is set to Weekly, select the day when logs will be sent.
If Unit is set to Daily or Weekly, select the time when logs will be sent.
SYSLOG SERVER CONFIGURATION
To have the wireless controller send logs to a Syslog server, check one or more boxes. You can
check up to 8 Syslog servers and use them concurrently.
Enter the IP address or Internet Name of the Syslog server.
For each syslog server, select a unique facility for logging. Facility values are defined in RFC
3164. Choices are:
All
•
Kernel
•
System
•
Select the appropriate Syslog severity. When a severity is selected, all Syslogs with severity
equal to or greater than the chosen severity are logged on the configured Syslog Server.
225
DWC-1000 Wireless Controller User's Guide
Description