Removing The Cis Frame And Cis Units - Brother CB200 Service Manual

Removing the CIS frame and CIS units

(5) Remove the CIS frame (two cup S taptite screws, M3x10 from its each end).
(6) Pivot up the CIS frame as shown below, remove the three harness sponges, disconnect the
three CIS harnesses from the CIS units, and then lift up the CIS frame.
NOTE: When handling the CIS frame, hold it as shown below, taking care not to touch the
glass prism bars or transparent sheets. If you touch any of them, be sure to wipe it with a soft
cloth. NEVER use alcohol to clean it.
III - 23