Brother CB200 Service Manual page 46

(8) Turn the copyboard upside down.
(9) On the grip, straighten the cable clip and release the printer-copyboard interface cable.
(10) Remove the PCB support (two cup S taptite screws, M3x10) together with the printer-
copyboard interface cable and the relay PCB.
(11) Remove two screws (two cup S taptite screws, M3x6) from the relay PCB and disconnect the
printer-copyboard interface cable.
(12) Remove the printer-copyboard interface cable (two cup S taptite screws, M3x10 on the cable
clamp).
III - 28