HP FM064UT#ABA Maintenance And Service Manual page 95

4. Remove the front bezel (see
5. Remove the top set of fastening screws from the I/O device assembly (1), as shown in the
following figure.
Figure 5-10
6. Remove the bottom set of fastening screws from the I/O device assembly (2).
7.
Pull the mounting bracket away from the chassis (3).
8. Grasp the I/O device assembly (4), and pull it away from the chassis (5).
ENWW
Removing the front bezel on page
Removing the front panel I/O device assembly
82).
Removing and installing components 83