HP RP3 Maintenance And Service Manual page 113

Maintenance & service guide hp rp3 retail system model 3100
Table of Contents

Advertisement

Network driver does not detect network controller.
Cause
Network controller is disabled.
Incorrect network driver.
Network status link light never flashes.
NOTE:
The network status light is supposed to flash when there is network activity.
Cause
No active network is detected.
Network controller is not set up properly.
Network controller is disabled.
Network driver is not properly loaded.
System cannot autosense the network.
Diagnostics reports a failure.
Cause
The cable is not securely connected.
The cable is attached to the incorrect connector.
There is a problem with the cable or a device at the other
end of the cable.
106 Appendix F Troubleshooting Without Diagnostics
Solution
1.
Run Computer Setup and enable network controller.
2.
Enable the network controller in the operating system
using Device Manager.
To access Device Manager in Windows 7, click Start,
select Control Panel, and then select Device
Manager.
Check the network controller documentation for the correct
driver or obtain the latest driver from the manufacturer's Web
site.
Solution
Check cabling and network equipment for proper connection.
Check for the device status within Windows, such as Device
Manager for driver load and the Network Connections applet
within Windows for link status.
To access Device Manager in Windows 7, click Start, select
Control Panel, and then select Device Manager.
1.
Run Computer Setup and enable network controller.
2.
Enable the network controller in the operating system
using Device Manager.
To access Device Manager in Windows 7, click Start,
select Control Panel, and then select Device
Manager.
Reinstall network drivers.
Disable auto-sensing capabilities and force the system into
the correct operating mode.
Solution
Ensure that the cable is securely attached to the network
connector and that the other end of the cable is securely
attached to the correct device.
Ensure that the cable is attached to the correct connector.
Ensure that the cable and device at the other end are
operating correctly.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rp3 3100

Table of Contents