Riser Card
There are two riser cards available from HP for this product. One has a PCI slot and the other has a
PCI Express x1 slot. Both cards have a slot designated for the Powered Serial Port expansion card.
To replace the riser card:
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
If an expansion card is installed in one of the riser card expansion slots, push outward on the tab
located on the back of the expansion card retention latch inside the chassis (1) and rotate the
latch open (2).
4.
If an expansion card is installed in one of the riser card expansion slots, remove the card.
(Preparation for Disassembly on page
(Access Panel on page
16).
15).
Riser Card
29