Dell PowerEdge M820 Owner's Manual page 106
Dell poweredge m820 systems owner's manual
Hide thumbs
Also See for PowerEdge M820:
- Owner's manual (155 pages) ,
- Technical manual (47 pages) ,
- Reference manual (1682 pages)
Table of Contents
Advertisement
Error Code Message Information
LCD Message
Details
Action
PCI2002
Message
LCD Message
Details
Action
PCI3000
Message Device option ROM on embedded NIC failed to support Link Tuning or FlexAddress.
Details
Either the BIOS, BMC/iDRAC, or LOM firmware is out of date and does not support
FlexAddress.
Action
Update BIOS, BMC/iDRAC, and LOM firmware. If the issue persists, see
PCI3002
Message Failed to program virtual MAC address on a component at bus
<
Details
Either the BIOS, BMC/iDRAC, LOM, or NIC firmware is out of date and does not support
FlexAddress.
Action
Update BIOS, BMC/iDRAC, LOM, and mezzanine card firmware. If the issue persists, see
Getting
PCI3004
Message Device option ROM on mezzanine card <
FlexAddress.
Details
Either the BIOS, BMC/iDRAC, or mezzanine card firmware is out of date and does not
support FlexAddress.
Action
Update BIOS, BMC/iDRAC, and mezzanine card firmware. If the issue persists, see
Help.
PCI3006
Message
Details
Action
PCI3008
Message A non-fatal PCIe error detected on a component at bus <
<
Details
System performance may be degraded.
Action
Cycle input power, update component drivers, remove and reinstall the device at the next
service window.
106
Fatal IO error on bus <
System performance may be degraded, or system may fail to operate.
Cycle input power, update component drivers, remove and reinstall the device.
A fatal IO error detected on a component at slot <
Fatal IO error on slot <
System performance may be degraded, or system may fail to operate.
Cycle input power, update component drivers, remove and reinstall the device.
bus >device< device >function < func >.
Help.
Failed to get Link Tuning or FlexAddress data from iDRAC.
Either the BIOS or BMC/iDRAC firmware is out of date and does not support FlexAddress.
Update BIOS, and BMC/iDRAC firmware. If the issue persists, see
func >.
bus > device < device > function < func >.
number >.
number > failed to support Link Tuning or
number >.
Getting
Help.
Getting
Help.
bus >device< device >function
Getting
Advertisement
Table of Contents
Troubleshooting
