Dell PowerEdge M820 Owner's Manual page 108

Error Code Message Information
Details The controller received a SMART error from the drive. The drive is operational but needs
replacement.
Action The drive will need replacement at the next service window.
PDR1016
Message
LCD Message
Details
Action
PDR1024
Message
LCD Message Drive mismatch detected for drive <
Details
Action
PST0128
Message
LCD Message
Details
Action
PST0129
Message
LCD Message Memory is detected, but is not configurable. Check memory devices.
Details
Action
PST0130
Message
LCD Message Memory is configured, but not usable. Check memory devices
Details
Action
PST0131
Message
LCD Message System BIOS shadow failed. Check memory devices.
Details
108
number > is removed from disk drive bay < bay >.
Drive <
number > removed from disk drive bay < bay >. Check drive.
Drive <
The controller detected that the drive was removed.
Verify drive installation. Re-seat the failed drive. If the issue persists, see
Drive mismatch detected for drive <
The installed disk does not meet the array requirements, for example a SATA disk may
not operate in an array containing SAS drives.
Verify that the disk meets the array requirements.
No memory is detected.
No memory is detected. Inspect memory devices.
System BIOS was unable to detect memory in the system .
Re-seat the memory modules. If the issue persists, see
Memory is detected, but is not configurable.
System BIOS detected memory, but was unable to configure the memory for system
operation.
Compare system memory installation to supported system memory configurations.
Memory is configured, but not usable.
The system BIOS encountered device failures or speed configurations that resulted in
unused memory.
Re-seat the memory modules. If the issue persists, see
System BIOS shadow failed.
Memory errors occurred copying BIOS image into system memory.
number > in disk drive bay < bay >.
number > in bay < bay >. Install correct drive type.
Getting
Getting
Getting Help.
Help.
Help.