Dell PowerEdge M820 Owner's Manual page 97

Error Code Message Information
HWC5032
Message
Details
Action
HWC5034
Message
Details
Action
HWC5036
Message
Details
Action
HWC6000
Message
Details
Action
HWC6002
Message
Details
Action
HWC6003
Message
HWC6004
Message
Details
Action
HWC7002
Message
Details
Action
HWC7004
Message Server <
Details Server <
Action Review System Log or front panel for additional information.
HWC7006
Message Server <
Details Server <
A fabric mismatch detected on IO module <
The fabric type for IOM's on the same chassis fabric must match.
Check chassis fabric type in CMC GUI and compare to the type of both IOM's.
A link tuning failure detected on IO module <
Link tuning table not supported for this IO modular.
Update the CMC firmware. If the issue persists, see
A failure is detected on IO module <
The IOM module performance may be impacted.
If the issue persists, see
name > controller is offline.
The <
Information and status from the controller is unavailable.
Remove and reapply input power. If the issue persists, see
name > controller is stuck in boot mode.
The <
Information and status from the controller is unavailable.
Remove and reapply input power. If the issue persists, see
The < name > controller is booting.
Cannot communicate with <
Information and status from the controller is unavailable.
Remove and reapply input power. If the issue persists, see
number > health changed to a warning state from a normal state.
Server <
Server < number > health changed to a warning state from a normal state.
Review System Log or front panel for additional information.
number > health changed to a critical state from either a normal or warning state.
number > health changed to a warning state from a normal state.
number > health changed to a nonrecoverable state from a less severe state.
number > health changed to a warning state from a normal state.
number >.
number >.
Getting
number >.
Getting Help.
name > controller.
Help.
Getting Help.
Getting Help.
Getting Help.
97