Dell PowerEdge M820 Owner's Manual page 129

Error Code Message Information
VLT0201
Message
LCD Message System board voltage is outside of range.
Details
Action
VLT0202
Message
LCD Message System board voltage is outside of range.
Details
Action
VLT0203
Message
LCD Message System board voltage is outside of range.
Details
Action
VLT0204
Message
LCD Message System board voltage is outside of range.
Details
2. Remove the processor module. Inspect processor socket for bent pins.
3. If the issue persists, see
name > voltage is less than the lower warning threshold.
The system board <
System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
name > voltage is greater than the upper warning threshold.
The system board <
System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
name > voltage is greater than the upper critical threshold.
The system board <
System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
name > voltage is outside of the allowable range.
The system board <
System hardware detected an over voltage or under voltage condition.
Getting Help.
Getting Help.
Getting Help.
Getting Help.
129