Dell PowerEdge M820 Owner's Manual page 96

Error Code Message Information
Action Check presence of the hardware, reinstall or reconnect, then reattempt the update. If the
issue persists, see
HWC4013
Message Hardware unsuccessfully updated for embedded NIC.
Action Check presence, reinstall or reconnect, then reattempt the update. If the issue persists, see
Getting
HWC4015
Message
Details
Action
HWC5001
Message
Action
HWC5002
Message A fabric mismatch detected on <
Details The fabric type for the IOM and mezzanine cards must match.
Action Check chassis fabric type in CMC GUI and compare to the type of IOM or mezzanine card.
HWC5004
Message
Details
Action
HWC5006
Message
Action
HWC5008
Message
Action
HWC5010
Message
Action
HWC5014
Message
Action
HWC5031
Message
Details
Action
96
Getting Help.
Help.
Link Tuning error detected.
CMC has old firmware. After updating the firmware the CMC will recognize the device.
Update the CMC firmware. If the issue persists, see
name > is offline.
<
If unexpected, check presence, then reinstall or reconnect.
A link tuning failure detected on <
CMC has old firmware. After updating the firmware the CMC will recognize the device.
Update the CMC firmware. If the issue persists, see
A failure is detected on <
If the issue persists, see
Console is not available for the <
If the issue persists, see
name > cannot detect any hosts.
<
If the issue persists, see
name > is not functional and is powered off.
<
If the issue persists, see
IO module < number > is offline.
The CMC has powered off the IOM.
If the issue persists, see
Getting
name >.
name >.
Getting
name >.
Getting Help.
name >.
Getting Help.
Getting Help.
Getting Help.
Getting Help.
Help.
Help.