Epson C82314* User Manual page 26

COMMAND 1: BUFFER SIZE
Selects logical default buffer size
VALUE DESCRIPTION
1
*2
3
4
5
NOTES: This command, along with the ' Z99,0' command, changes the logical
buffer size selection in the non-volatile memory of the interface. The
logical buffer size is only reported to the host the next time the unit is
powered up.
The physical buffer size is permanently set at 4K.
EXAMPLE: &%Z1,3
COMMAND 2: LINES PER INCH
Selects default LPI.
VALUE DESCRlPTlON
3
4
*6
8
NOTES: This default emulates the front panel selection on an IBM printer.
The IBM host can control the LPI unless Command 36 is used to
select override of host LPI commands.
EXAMPLE: &%Z2,8
960 characters
1920 characters
2560 characters
3440 characters
3564 characters
Sets logical buffer size to 2560 characters.
3 LPI
4 LPI
6 LPI
8 LPI
Sets the printer to 8 LPI default