Epson C82314* User Manual page 39

COMMAND 36: SUPPRESS IBM CONTROL CODES
This function is used to select suppression of all or some IBM control codes
sent from the host system.
VALUE DESCRIPTION
*0
1
2
3
4
5
NOTES: If this command is set to 1, documents will have to be formatted by
sending transparent control codes to the printer using Command-
Pass-Thru or SCS mode transparent data
If this command is set to 2, the SCS pitch (CPI) and line density (LPI)
commands are suppressed (Not sent to the printer).
EXAMPLE: &%Z36,2
COMMAND 37: VERTICAL CHANNEL SELECT (VCS)
Specifies vertical channel select VCS) emulation.
VALUE DESCRIPTION
0
*1
EXAMPLE: &%Z37,0
Obey all IBM control codes
Suppress all IBM control codes
Suppress only LPI and CPI control codes
Suppress only CPI control codes
Suppress only LPI control codes
Suppress print quality specified in the PPM command.
No LPI or CPI commands are sent to the printer.
The printer prints using the user specified selections.
3287 VCS emulation
3268/4214/4224 VCS
Selects 3287 VCS emulation
emulation
A-15