Ff Valid Location; Automatic Function At End Of Job - Epson C82314* User Manual

COMMAND 19: FF VALID LOCATION
Sets the printer in accordance with the RPQ installed in the control unit
VALUE DESCRIPTION
* 0
1
NOTES: To use this function, the RPQ should be:
Available only in non-SCS operation.
EXAMPLE: &%Z19,1
COMMAND 20: AUTOMATIC FUNCTION AT END OF JOB
Sets the printer in accordance with the RPQ installed in the control unit.
VALUE DESCRIPTION
* 0
1
NOTES: To use this function, the RPQ should be:
Available only in non-SCS operation
Do not press the form feed or line feed buttons on the front of the
printer. This will cause the host and printer to lose synchronization of
paper position. This command reduces the need to advance the
paper.
EXAMPLE: &%Z20,1
FF is valid only at the first print position or at position
MPP+1.
FF is valid anywhere it occurs.
IBM 3268 RPQ SC9506
IBM 3287 RPQ SC3739
IBM 4214 OPT 19=1
Makes FF valid anywhere it occurs
NL is automatically executed after the buffer is completed
(unless an FF, NL, or CR was last in the buffer).
FF is automatically executed after the print buffer is
completed (unless an FF was last in the buffer).
IBM 3268 RPQ SC9507
IBM 3287 RPQ SC3740
IBM 4214 OPT 20=2
Sets the printer to issue an FF automatically at the
end of the print buffer.
A-11