Epson C82314* User Manual page 42

COMMAND 45: SCS TRN TRANSLATE
Specifies how transparent data sent using SCS code 35 is handled.
VALUE DESCRIPTION
0
1
*
NOTES: Value 1 causes valid graphic characters to be printed normally (i.e.,
converted from EBCDIC to ASCII), control codes and invalid graphics
to be printed as hyphens, and normal page formatting is maintained.
Value 0 causes the 8 bit binary codes to be sent directly to the printer
just as they are received from the host.
SCS code 36 functions the same as code 35.
EXAMPLE: &%Z45,0
COMMAND 50: PARALLEL PORT TIME OUT
Selects the time interval that the interface waits for receipt of additional data
from the alternate (PC) host before automatically switching to check for data
from the coax host.
VALUE DESCRIPTION
01
to
60
*5
NOTES: The interface sends a reset command to the printer and restores the
coax host defined format commands (i.e. LPI, CPI, MPL, MPP) prior to
printing data from the coax host after having printed data from the
shared parallel port.
Binary Transparent
Emulate IBM 3287 Printer
All SCS Code 35 data is sent to the printer as binary
codes without translation.
Time interval in number of seconds
Factory Default is 5 seconds
A-18