Using The Control Panel To Check The Printer - Epson 10600 Printer Manual

6-2 | Resolving Problems
Error messages
Message Light
INK LOW Ink Out light(s)
flashing
INK OUT Ink Out light(s)
on
NO INK Ink Out light(s)
CARTRIDGE on
WRONG Ink Out light(s)
CARTRIDGE on
INVALID
CARTRIDGE

Using the Control Panel to Check the Printer

The control panel includes various lights and a display to indicate the status
of the printer:
display
When your ink or paper runs out or a problem occurs, a message appears on
the display. The lights on the control panel come on or flash. The following
table lists the messages alphabetically and includes an explanation and
instructions for correcting the problem.
Explanation
Ink cartridge(s) are
nearly empty (printing
continues).
Ink cartridge(s) are
empty (printing stops).
Ink cartridge(s) not
installed.
You tried to install the
wrong ink cartridge.
6-2
Response
Replace ink cartridge(s) indicated by Ink Out
light(s). See page 5-10 for instructions.
Replace the ink cartridge(s) indicated by Ink
Out light(s). See page 5-10 for instructions.
Install ink cartridges as indicated by the lights.
Make sure you install the correct Photographic
Dye, Archival ink, or UltraChrome ink
cartridges. See page 5-10 for instructions.
If you are installing ink cartridges for the first
time, you must install the cartridges that came
with your printer.
If you are replacing ink cartridges, check the
package and product code. You must use the
ink cartridges designed for your printer. Other
cartridges will not work.