Epson 10600 Printer Manual page 30

Epson user's guide printer 10600
Hide thumbs Also See for 10600:
Table of Contents

Advertisement

Warning
If ink gets on your hands,
wash them thoroughly with
soap and water. If ink gets
in your eyes, flush them
immediately with water.
Note
If you can't insert the
cartridge smoothly,
you may have the
wrong cartridge.
Caution
Do not turn off the
printer, change the
position of the paper set
lever, or open the lower
cover or ink compartment
cover while the printer is
charging ink.
6. Hold the cartridge so the arrow mark on its left side is pointing toward
the printer. Insert the cartridge into the slot. Don't force it.
7. Push the clamp back up into the locked position.
8. Repeat step 4 through step 7 for the other ink cartridges. When you're
done, close the ink compartment cover.
The printer begins charging the ink delivery system. The
control panel flashes and the printer makes various sounds.
Charging takes about 10 minutes. Do not turn off the printer or interrupt
this process or you'll use more ink than necessary. When the
stops flashing and
Paper Out
ready to load the roll paper.
1-15
Setting Up the Printer
appears on the control panel display, you're
|
1-15
light on the
Pause
light
Pause

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus pro 10600 series

Table of Contents