Saving Your Settings - Epson 10600 Printer Manual

Note
It's a good idea to keep a
list of your registered
paper types and numbers.
4. Use the or - button to make any necessary changes, then press
+
to save your new setting.
5. To adjust another setting, continue pressing the
see the desired menu option.
6. When done, press the

Saving Your Settings

You can create up to 10 groups of settings, one for each type of paper you
want to use. When doing so, you can also profile your paper's thickness.
Then you can easily select your customized settings whenever you print on a
particular stock.
1. Press the
SelecType
the display.
2. Press the button.
Item
3. If you're registering your first roll or type of paper, press the
select
PAPER NUMBER=1
For subsequent rolls, continue pressing the
number you want to register.
4. Press the button.
Item
Press to print the paper thickness test pattern.
Enter
Following is a sample pattern:
1
2 3 4 5
5. Examine the printed pattern to determine which set of lines is the
straightest or has the most even edges, and note the corresponding
number.
In the sample pattern, the lines under number 4 are the straightest.
2-29
Using Paper and Other Media
or
Pause SelecType
button until
PAPER CONFIG. MENU
PAPER NUMBER=STD
. Then press the
THICK. PAT.=PRINT
6 7 8 9 10 11
button until you
Item
button to exit the menu.
appears on
appears on the display.
button to
+
button.
Enter
button to select the
+
appears on the display.
12 13 14 15 16
| 2-29
Enter
17