Epson USN 52R Operating Manual page 158

Function directory
Function
a-START (GATE)
a-THRESH (GATE)
a-WIDTH (GATE)
AMPLITUDE (left)
ANGLE (center)
ASCAN (center)
AUTO CAL (right)
BAUD RATE (right)
COPY MODE (center)
CURVE (TCG)
DAC ECHO (TCG)
DAC/TCG (TCG)
DAMPING (RCVR)
Krautkramer USN 52R/USN 52L
Description
Selection of the start point of the corresponding gate
Adjustment of the level of the gate threshold in % of screen height
Adjustment of the gate width related to the start point of the corresponding gate
Selection of the measurement mode for the evaluation of the flaw amplitude
Entry of the probe's angle for calculation of the flaw location
Setting the echo display (as outline or filled)
Enables automatic calibration
Adjustment of the baud rate for data transfer via the RS232 interface
Selection of type and form of printout
Display of DAC curve
Number of reference echoes of the DAC curve; storage of one reference echo in the
recording mode (REC)
Setting of DAC/TCG function
Setting of damping resistor
Issue 05, 02/00
Appendix
10-3