Battery Operation; Inserting The Batteries - Epson USN 52R Operating Manual

Positioning the USN 52 R

Battery operation

For battery operation, you will either require 6 NiCd or
alkaline batteries (D-cells). The current battery voltage
is indicated on the display by a symbol:
H Note:
The batteries should be exchanged as soon as possible
when the charge indication is at about 25%. The instru-
ment automatically switches off when reliable operation
can no longer be ensured. We recommend that a spare
set of fully charged batteries be available when using
the instrument for longer periods outside.
When the batteries are exchanged, all settings will re-
main stored and are instantly available when switching
on again.
H Note:
Used or defective batteries are special refuse and shall
be disposed of according to legal regulations.

Inserting the batteries

To insert new batteries, you must first loosen the four
screws at the bottom of the instrument (see following
figure) and then remove the battery compartment lid.
Krautkramer USN 52R/USN 52L
Each battery in the battery pack is secured with a
separate holder.
Attention:
When inserting the batteries, make sure that the polari-
ties are correct and that the switch in the battery com-
partment is set to the type of battery being used!
Nickel Cadmium (NiCd):
Alkaline (Alk):
This ensures that only rechargeable batteries are
charged.
Issue 05, 02/00
Setting into operation
left
right
3-3